
LEGO® Invader
The Invader is a Blacktron I spacecraft from 1987. It has 159 pieces and two minifigures, and it shows off the dark, sharp look the line is known for.
- Set number
- 6894
- Year
- 1987
- Pieces
- 159
- Minifigures
- 2
- Theme
- Blacktron I
- Different parts
- 66
Parts list 66
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 8![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Black](/media/parts/3660/0/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-black.jpg)
-
Plate 2 × 2 × 6
-
Plate 1 × 2 × 6
-
Plate 1 × 1 × 6
-
Brick Special 1 × 1 with Headlight × 6
-
Wedge Plate 3 × 6 Cut Corners No longer produced · last seen 2002 × 4
-
Brick 1 × 2 × 4
-
Tile 1 × 1 with Groove × 4
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 4![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Yellow](/media/parts/3660/14/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-yellow.jpg)
-
Brick Sloped Inverted 45° 2 × 1 × 4
-
Hinge Plate 1 × 2 with 3 Fingers [Hollow Studs] No longer produced · last seen 2004 × 4![Hinge Plate 1 × 2 with 3 Fingers [Hollow Studs] Black](/media/parts/4275b/0/hinge-plate-1-x-2-with-3-fingers-hollow-studs-black.jpg)
-
Hinge Plate 1 × 2 with 2 Fingers and Hollow Studs No longer produced · last seen 2004 × 4
-
Brick Special 2 × 2 with Pin and No Axle Hole No longer produced · last seen 1994 × 4
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] No longer produced · last seen 2024 × 4![Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] Black](/media/parts/73983/0/hinge-plate-1-x-4-swivel-top-base-solid-clip-complete-assembly-black.jpg)
-
Plate 1 × 4 × 3
-
Panel 3 × 3 × 6 Corner Wall with Blacktron I Logo Print No longer produced · last seen 1987 × 2
-
Brick 2 × 2 Corner × 2
-
Brick 1 × 1 × 2
-
Plate 2 × 2 No longer produced · last seen 2005 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 1 × 2
-
Plate 4 × 10 × 2
-
Brick Sloped 45° 2 × 4 × 2
-
Brick Sloped 45° 2 × 2 × 2
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 2
-
Brick Round 1 × 1 Open Stud × 2
-
Tile 2 × 2 with Groove × 2
-
Tile 1 × 2 with Groove × 2
-
Brick 1 × 3 × 2
-
Plate 1 × 6 × 2
-
Technic Brick 1 × 4 [3 Pin Holes] × 2![Technic Brick 1 × 4 [3 Pin Holes] Black](/media/parts/3701/0/technic-brick-1-x-4-3-pin-holes-black.jpg)
-
Brick Sloped Inverted 33° 3 × 2, No Connections between Studs, Ovoid Bottom Pin No longer produced · last seen 2007 × 2
-
Plate 2 × 10 × 2
-
Antenna 1 × 4 with Rounded Top No longer produced · last seen 2014 × 2
-
Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] × 2![Plate Special 1 × 1 with Clip Light, Bar Hole [Thick Ring] Black](/media/parts/4081b/0/plate-special-1-x-1-with-clip-light-bar-hole-thick-ring-black.jpg)
-
Plate Special 1 × 1 with Clip Vertical [Thin U Clip] No longer produced · last seen 2009 × 2![Plate Special 1 × 1 with Clip Vertical [Thin U Clip] Black](/media/parts/4085b/0/plate-special-1-x-1-with-clip-vertical-thin-u-clip-black.jpg)
-
Plate 1 × 10 × 2
-
Panel 1 × 2 × 1 [Square Corners] No longer produced · last seen 2016 × 2![Panel 1 × 2 × 1 [Square Corners] Black](/media/parts/4865a/0/panel-1-x-2-x-1-square-corners-black.jpg)
-
Panel 1 × 2 × 1 [Square Corners] No longer produced · last seen 1987 × 2![Panel 1 × 2 × 1 [Square Corners] Trans-Yellow](/media/parts/4865a/46/panel-1-x-2-x-1-square-corners-trans-yellow.jpg)
-
Plate Round 1 × 1 with Solid Stud × 2
-
Wedge Plate 3 × 6 Cut Corners × 1
-
Tile Special 1 × 2 with Handle × 1
-
Brick 2 × 4 × 1
-
Brick 1 × 2 with Yellow Down Arrow and Black Border Print No longer produced · last seen 1987 × 1
-
Plate 2 × 3 × 1
-
Plate 4 × 4 × 1
-
Plate 4 × 4 × 1
-
Brick Sloped 45° 2 × 2 with 12 Buttons, 3 Red Lamps, Yellow Panel Print No longer produced · last seen 1988 × 1
-
Tile 1 × 2 with Space Computer Print No longer produced · last seen 1988 × 1
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper) No longer produced · last seen 2014 × 1
-
Wedge, Plate 8 × 4 Wing Left without Underside Stud Notch No longer produced · last seen 1990 × 1
-
Wedge Plate 8 × 4 Wing Right without Stud Notch No longer produced · last seen 1990 × 1
-
Hinge Brick 1 × 2 Base × 1
-
Hinge Brick 1 × 2 Top Plate Thin No longer produced · last seen 2011 × 1
-
Brick Round 2 × 2 with Axle Hole No longer produced · last seen 2004 × 1
-
Bracket 2 × 2 - 2 × 2 × 1
-
Tool Screwdriver and Spanner / Wrench × 1
-
Hinge Vehicle Roof 4 × 4 No longer produced · last seen 2003 × 1
-
Hinge Vehicle Roof Holder 1 × 4 No longer produced · last seen 2003 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Minifigures 2
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
- 6894 Blacktron Explorer
- 6894 Blacktron Mech - LEGO Blacktron Invader Alternate Build
- 6894 Light Freight Cargo
Description
A bold black-and-yellow look
Blacktron I remains one of the most recognisable Space lines of its era, and the Invader shows why. Black forms the outline, yellow adds sharp accents, and trans-red hints at lights and cockpit glass. Light grey fills in the remaining details. The result is high contrast without being fussy. At 159 pieces the set is on the small side, but its colour scheme carries a lot of character and makes it easy to spot in any collection.
Crew and fleet potential
Two minifigures are included, so the spacecraft has a crew straight away. Even with a modest piece count you can stage a small scene using the ship, its pilots and a few extra bricks from your own stock. If you own other Blacktron sets, the Invader slots in neatly as part of a larger fleet, because the line followed one consistent design language. Figures and vehicle clearly belong together. That makes it easy to build a coherent group from several sets.
58 part types in a small set
Among the 159 pieces there are 58 different part types, which is a high variety for a model this size. It suggests plenty of specialised elements for shape and detail rather than a pile of identical bricks. If you are completing a second-hand copy, the parts list becomes especially useful, since a few less common elements are easy to lose. Compare it item by item with what you have in the box.
For display or for play
On a shelf, the Invader stands out beside other Blacktron ships, where the black and yellow styling is instantly recognisable. It is just as happy being played with, since the build is compact and sturdy. And if you would rather reuse the bricks, the “What can I build?” tool shows which other models your current collection could make, including this set's parts if you add them to your inventory. Either way it is a rewarding little model.
FAQ
- How many pieces is the Invader?
- It has 159 pieces in 58 part types, plus two minifigures.
- Which theme is it from?
- It belongs to Blacktron I in the Space theme and came out in 1987.
- What are the main colours?
- Black and yellow lead, with trans-red and light grey as supporting colours.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



