
LEGO® Interplanetary Rover
The Interplanetary Rover comes from the Futuron space range and was released in 1988. It has 211 pieces, includes four minifigures and arrives in a cool mix of white, black and grey.
- Set number
- 6925
- Year
- 1988
- Pieces
- 211
- Minifigures
- 4
- Theme
- Futuron
- Different parts
- 64
Parts list 64
-
Plate 1 × 2 × 9
-
Tyre 30 × 10.5 Offset Tread No longer produced · last seen 2008 × 8
-
Plate 1 × 1 × 8
-
Wheel with Split Axle Hole No longer produced · last seen 2003 × 8
-
Technic Axle Pin without Friction Ridges Lengthwise No longer produced · last seen 2006 × 8
-
Wedge Plate 3 × 6 Cut Corners × 6
-
Brick 1 × 2 × 6
-
Bar 1 × 3 [Clip / Anti-Stud] No longer produced · last seen 2006 × 6![Bar 1 × 3 [Clip / Anti-Stud] White](/media/parts/4735/15/bar-1-x-3-clip-anti-stud-white.jpg)
-
Plate Round 1 × 1 with Solid Stud × 6
-
Plate 1 × 2 × 5
-
Brick 2 × 2 Corner × 4
-
Brick 2 × 2 Corner × 4
-
Brick 2 × 4 × 4
-
Plate 2 × 2 × 4
-
Brick Sloped Inverted 45° 2 × 1 × 4
-
Technic Brick 1 × 6 [5 Pin Holes] × 4![Technic Brick 1 × 6 [5 Pin Holes] White](/media/parts/3894/15/technic-brick-1-x-6-5-pin-holes-white.jpg)
-
Dish 4 × 4 Inverted [Radar] × 4![Dish 4 × 4 Inverted [Radar] White](/media/parts/3960/15/dish-4-x-4-inverted-radar-white.jpg)
-
Equipment Metal Detector No longer produced · last seen 2010 × 4
-
Brick Special 2 × 2 with Pin and No Axle Hole No longer produced · last seen 1994 × 4
-
Dish 2 × 2 Inverted [Radar] × 4![Dish 2 × 2 Inverted [Radar] Black](/media/parts/4740/0/dish-2-x-2-inverted-radar-black.jpg)
-
Plate Round 1 × 1 with Solid Stud × 4
-
Brick 2 × 2 × 3
-
Brick 1 × 6 × 3
-
Wing, Tail 4 × 1 × 3 × 2
-
Panel 3 × 3 × 6 Corner Wall No longer produced · last seen 1995 × 2
-
Brick Wedged 3 × 3 Facet × 2
-
Brick Wedged 3 × 3 Facet × 2
-
Lever Small Base with Black Lever × 2
-
Lever Small Base with White Lever No longer produced · last seen 2014 × 2
-
Brick 1 × 1 × 2
-
Plate 2 × 4 × 2
-
Plate 1 × 1 × 2
-
Plate 6 × 12 × 2
-
Brick Sloped 45° 2 × 1 with Bottom Pin × 2
-
Tile 1 × 2 with Space Computer Print No longer produced · last seen 1991 × 2
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 2![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Black](/media/parts/3660/0/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-black.jpg)
-
Plate 1 × 6 × 2
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper) No longer produced · last seen 2014 × 2
-
Plate 2 × 6 × 2
-
Antenna 1 × 4 with Rounded Top No longer produced · last seen 2014 × 2
-
Brick Special 1 × 1 with Headlight × 2
-
Hinge Plate 1 × 2 with 3 Fingers [Hollow Studs] No longer produced · last seen 2003 × 2![Hinge Plate 1 × 2 with 3 Fingers [Hollow Studs] White](/media/parts/4275b/15/hinge-plate-1-x-2-with-3-fingers-hollow-studs-white.jpg)
-
Hinge Plate 1 × 2 with 2 Fingers and Hollow Studs No longer produced · last seen 2006 × 2
-
Brick Sloped 33° 3 × 1 × 2
-
Equipment Weapon, Loudhailer / Speaker / Blaster / Space Gun No longer produced · last seen 2000 × 2
-
Plate Special 1 × 2 with Bar Up [Horizontal Arm 6mm] No longer produced · last seen 2010 × 2![Plate Special 1 × 2 with Bar Up [Horizontal Arm 6mm] White](/media/parts/4623/15/plate-special-1-x-2-with-bar-up-horizontal-arm-6mm-white.jpg)
-
Plate Round 1 × 1 with Solid Stud × 2
-
Bar 1 × 8 × 2 No longer produced · last seen 2009 × 1
-
Brick 1 × 2 with Yellow Down Arrow and Black Border Print No longer produced · last seen 1988 × 1
-
Plate 2 × 4 × 1
-
Brick Sloped 45° 2 × 2 × 1
-
Tile 2 × 2 with Groove × 1
-
Hinge Plate 2 × 4 with Articulated Joint - Male No longer produced · last seen 1999 × 1
-
Hinge Plate 2 × 4 with Articulated Joint - Female No longer produced · last seen 1999 × 1
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] No longer produced · last seen 2021 × 1![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] White](/media/parts/3660/15/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-white.jpg)
-
Plate 1 × 6 × 1
-
Plate 2 × 6 × 1
-
Plate Special 1 × 2 with Handles [Flat Ends / Low Attachment] × 1![Plate Special 1 × 2 with Handles [Flat Ends / Low Attachment] Black](/media/parts/3839b/0/plate-special-1-x-2-with-handles-flat-ends-low-attachment-black.jpg)
-
Bracket 2 × 2 - 2 × 2 × 1
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening) × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Minifigures 4
Description
A vehicle for distant planets
Futuron was one of the space lines from LEGO®, where explorers roam faraway worlds in vehicles and stations. The rover belongs to the exploration side of that story. With 211 pieces it is a mid-sized set: big enough for a properly equipped vehicle, yet still easy to take in. If you collect space sets from the period, this is a typical example of the Futuron look and a handy reference for the era. It also works well as a first stop for anyone curious about the look of classic space sets.
Cool colours and clear blue
White, black and light grey lead the palette, joined by trans-dark blue, which usually stands for canopies and windows. Together they give the rover its technical feel. Among the 211 pieces there are 54 different elements, including specialist parts that rarely turn up in ordinary town sets. That is exactly why the parts list repays a look, for example if you want to extend your own space builds with similar pieces. The clean grey surfaces also combine neatly with other sets from the range.
Four crew, plenty of play
Four minifigures make a generous crew for a set of this size. They turn the rover into a proper play set: the team climbs in and out, explores the surroundings and swaps seats in the vehicle. It is less a pure display model, although it looks good on a shelf next to other Futuron sets. The figures are part of what makes the set appealing to collectors who care about completeness.
Building on what you have
Many of the grey and white parts can be reused in spaceships and bases of your own. The parts list on this page shows every element with its quantity and colour. The “What can I build?” tool also tells you which further sets can be rebuilt fully or partly with this material, in case you already own the pieces in a collection and want to make something new out of them.
FAQ
- How many minifigures come with it?
- The set includes four minifigures and 211 pieces in 54 different shapes.
- Which theme does the rover belong to?
- It is part of the Futuron space range and was released in 1988.
- What colours are typical?
- White, black and light grey, plus trans-dark blue. Every colour is listed in the parts list.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



