
Jestro's Volcano Lair
Jestro's Volcano Lair is the villains' headquarters from LEGO®'s Nexo Knights line, a fortress built into the shape of a volcano from 1,186 pieces. With ten minifigures, it's one of the more figure-heavy sets of its era, making it as much a stage for scenes as a display model.
- Set number
- 70323
- Year
- 2016
- Pieces
- 1,186
- Minifigures
- 10
- Theme
- Nexo Knights
- Different parts
- 354
Parts list 354
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid]
No longer produced · last seen 2018
× 32
-
Brick Wedged 2 × 2 Facet
× 28
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 27
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 25
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 23
-
Weapon Spear Tip with Fins
× 22
-
Brick 1 × 2
× 20
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 17
-
Brick 1 × 6
× 14
-
Plate Round 1 × 1 with Solid Stud
× 14
-
Plate Round 1 × 1 with Open Stud
× 14
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
No longer produced · last seen 2024
× 13
-
Brick Wedged 4 × 4 Facet
× 12
-
Brick Sloped 45° 2 × 1 with Bottom Pin
× 12
-
Tile 1 × 4 with Groove
× 11
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2021
× 11
-
Brick 2 × 2
× 10
-
Plate 1 × 4
× 10
-
Plate Round 1 × 1 with Open Stud
× 10
-
Panel 1 × 2 × 3 [Side Supports / Hollow Studs]
No longer produced · last seen 2016
× 10
-
Technic Brick 1 × 14 [13 Pin Holes]
× 9
-
Technic Axle Pin with Friction Ridges Lengthwise
× 9
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Medium
× 9
-
Brick Special 1 × 2 with Masonry Brick Profile
× 9
-
Brick 1 × 8
× 8
-
Tile Special 1 × 1 with Clip with Rounded Edges
× 8
-
Panel 2 × 6 × 6 with Window Slot
No longer produced · last seen 2020
× 8
-
Brick 1 × 2 × 5 without Side Supports
× 8
-
Plate Special 1 × 4 with 2 Studs, 3 Bottom Tubes
No longer produced · last seen 2020
× 8
-
Arm Mechanical with Clip [Thick Support]
× 8
-
Brick 2 × 6
× 7
-
Plate 1 × 2
× 7
-
Brick 1 × 3
× 7
-
Technic Brick 1 × 2 [1 Pin Hole]
× 7
-
Technic Brick 1 × 4 [3 Pin Holes]
× 7
-
Weapon Lightsaber Hilt with Bottom Ring
× 7
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper)
× 7
-
Plate 2 × 2 Corner
× 6
-
Brick 2 × 3
× 6
-
Brick 1 × 1
× 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow]
× 6
-
Brick Round 1 × 1 Open Stud
× 6
-
Technic Brick 1 × 2 with Axle Hole Type 1 [+ Opening] and Bottom Pin
No longer produced · last seen 2018
× 6
-
Technic Brick 1 × 8 [7 Pin Holes]
× 6
-
Bracket 1 × 2 - 2 × 2
× 6
-
Tile 1 × 3
× 6
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud]
No longer produced · last seen 2023
× 6
-
Bracket 1 × 2 - 2 × 2 Inverted
× 6
-
Plate 2 × 8
× 5
-
Brick Sloped Inverted 45° 2 × 1
No longer produced · last seen 2021
× 5
-
Technic Pin Long with Friction Ridges Lengthwise, 2 Center Slots
No longer produced · last seen 2021
× 5
-
Brick Arch 1 × 3 × 3 [Gothic]
× 5
-
Brick Curved 2 × 2 × 2/3
× 5
-
Brick Curved 2 × 2 × 2/3
× 5
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper)
× 5
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid]
No longer produced · last seen 2018
× 5
-
Brick Sloped 75° 2 × 1 × 3 with Hollow Stud
× 5
-
Tile 2 × 4 with Groove
× 5
-
Tile Round 1 × 1
× 5
-
Plate 2 × 2 Corner
× 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (39)
These extra parts come with the set in case one gets lost.
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid]
No longer produced · last seen 2018
× 7
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 5
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope)
× 4
-
Plate Round 1 × 1 with Open Stud
× 4
-
Weapon Lightsaber Hilt with Bottom Ring
× 3
-
Tile Round 1 × 1
× 3
-
Technic Bush
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 2
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 2
-
Flame / Headwear Accessory Plume / Feather, Triple Point
× 2
-
Plate 1 × 1
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
No longer produced · last seen 2021
× 1
-
Technic Pin Connector Round 1L [Beam]
× 1
-
Tile Special Round 1 × 1 with Hollow Bar
× 1
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid]
No longer produced · last seen 2018
× 1
Minifigures 10
Description
A fortress shaped like a volcano
The model represents a volcano that doubles as the villains' base within the Nexo Knights story. At 1,186 pieces, 70323 sits among the larger sets in the range, which translates into a longer build and more surface detail than a typical vehicle or building set. The cone shape is built up from dark plates and bricks that give the whole structure a rocky, brooding silhouette. Builders who enjoy unusual shapes rather than standard houses or vehicles will find plenty to like here.
Ten minifigures for big scenes
Ten minifigures is a generous number for a set of this size, which makes the lair appealing to collectors who like to stage scenes with several characters at once. Knights and villains face off around the volcano, so the set works as a play environment just as much as a shelf piece. With a figure count this high, it's worth checking the parts list on this page, since helmets, weapons and other accessories often turn out to be useful for other minifigure projects too.
Colours and building material
Black and dark grey dominate the colour scheme, offset by red and a bright trans-orange used to suggest lava. Across the model, 354 distinct elements are used, which says more about the level of detail than the overall piece count of 1,186 does on its own. Anyone hunting for a particular colour or shape for a separate build should take a look through the full parts list further down this page, since a set this varied often hides useful pieces.
Who the set suits
Jestro's Volcano Lair is aimed at Nexo Knights fans and anyone after a large, themed structure rather than an everyday building. The combination of a high minifigure count and a distinctive volcano shape also makes it a good candidate for diorama or photography projects. Builders looking to grow their spare-parts collection will appreciate the 354 unique elements too, which leave plenty of material for future modifications and custom builds.
FAQ
- How many pieces does Jestro's Volcano Lair (70323) have?
- The set contains 1,186 pieces, making it one of the larger models in the Nexo Knights range.
- How many minifigures come with the set?
- Ten minifigures are included, an unusually high number for a set of this size.
- What colours define the model?
- The lair is mostly black and dark grey, with red accents and a trans-orange used for the lava effect.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



