
LEGO® The Brick Bounty
The Brick Bounty is the large pirate ship from the 2015 Pirates III wave, built from 745 pieces across 223 unique elements. Seven minifigures come aboard, splitting into two opposing crews. The reddish brown and dark tan colour scheme gives the hull a weathered, storytelling look rather than a glossy toy finish.
- Set number
- 70413
- Year
- 2015
- Pieces
- 745
- Minifigures
- 7
- Theme
- Pirates III
- Different parts
- 223
Parts list 223
-
Plate Round 1 × 1 with Solid Stud × 33
-
Brick 1 × 3 × 20
-
Technic Pin with Friction Ridges Lengthwise and Towball No longer produced · last seen 2020 × 16
-
Technic Axle and Pin Connector Angled #1 × 14
-
Brick Sloped 30° 1 × 2 × 2/3 × 12
-
Brick Round 1 × 1 Open Stud × 11
-
Brick Sloped Inverted 75° 2 × 1 × 3 × 10
-
Brick Sloped Inverted 45° 2 × 1 × 10
-
Technic Axle and Pin Connector Angled #2 - 180° × 10
-
Cone 1 × 1 [Top Groove] × 10![Cone 1 × 1 [Top Groove] Reddish Brown](/media/parts/59900/70/cone-1-x-1-top-groove-reddish-brown.jpg)
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 9![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Black](/media/parts/2654/0/plate-round-2-x-2-with-rounded-bottom-boat-stud-black.jpg)
-
Plate 1 × 4 × 9
-
Technic Axle Pin with Friction Ridges Lengthwise × 9
-
Brick 2 × 2 × 8
-
Plate 1 × 6 × 8
-
Technic Axle 4 × 8
-
Brick Sloped 33° 3 × 1 × 8
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 8![Brick Curved 2 × 1 No Studs [1/2 Bow] Red](/media/parts/11477/4/brick-curved-2-x-1-no-studs-12-bow-red.jpg)
-
Technic Pin Double Triangle 1 × 3 with 2 Clips Squared Pin Holes No longer produced · last seen 2023 × 8
-
Brick Sloped 65° 2 × 2 × 2 with Bottom Tube × 8
-
Window 1 × 2 × 3 Pane Latticed with Thick Corner Tabs × 8
-
Plate 2 × 4 × 7
-
Tile 1 × 4 with Groove × 6
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 6
-
Brick 1 × 2 × 6
-
Plate 1 × 2 × 6
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 6
-
Brick Round 1 × 1 Open Stud × 6
-
Tile 1 × 2 with Groove × 6
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top × 6
-
Technic Axle 2 Notched × 6
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 6
-
Brick Arch 1 × 6 Raised Arch × 6
-
Tile 1 × 4 with Groove × 5
-
Brick 1 × 2 × 5
-
Plate 2 × 3 × 5
-
Plate 1 × 2 × 5
-
Brick Sloped 45° 2 × 2 × 5
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] No longer produced · last seen 2024 × 5![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Reddish Brown](/media/parts/3660/70/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-reddish-brown.jpg)
-
Brick Special 1 × 2 Palisade [aka Log] × 5![Brick Special 1 × 2 Palisade [aka Log] Dark Tan](/media/parts/30136/28/brick-special-1-x-2-palisade-aka-log-dark-tan.jpg)
-
Brick Round 1 × 1 Open Stud × 5
-
Plate Special 2 × 2 with Groove and Center Stud (Jumper) × 5
-
Brick 2 × 2 Corner × 4
-
Tile Special 1 × 2 Grille with Bottom Groove × 4
-
Wedge Plate 3 × 3 Cut Corner × 4
-
Plate Special 1 × 2 Side Handle [Free Ends] × 4![Plate Special 1 × 2 Side Handle [Free Ends] Black](/media/parts/2540/0/plate-special-1-x-2-side-handle-free-ends-black.jpg)
-
Brick 2 × 4 × 4
-
Brick 1 × 1 × 4
-
Brick 1 × 1 × 4
-
Plate 2 × 2 × 4
-
Plate 1 × 8 × 4
-
Technic Brick 1 × 4 [3 Pin Holes] × 4![Technic Brick 1 × 4 [3 Pin Holes] Reddish Brown](/media/parts/3701/70/technic-brick-1-x-4-3-pin-holes-reddish-brown.jpg)
-
Technic Axle 10 × 4
-
Brick Special 1 × 1 with Headlight × 4
-
Plate Round 1 × 1 with Solid Stud × 4
-
Flag 2 × 2 Square, Flat Clip Edge [Thick Clips] No longer produced · last seen 2021 × 4![Flag 2 × 2 Square, Flat Clip Edge [Thick Clips] Black](/media/parts/11055/0/flag-2-x-2-square-flat-clip-edge-thick-clips-black.jpg)
-
Brick Arch 1 × 5 × 4 [Continuous Bow, Raised Underside Cross Supports] × 4![Brick Arch 1 × 5 × 4 [Continuous Bow, Raised Underside Cross Supports] Reddish Brown](/media/parts/14395/70/brick-arch-1-x-5-x-4-continuous-bow-raised-underside-cross-supports-reddish-brown.jpg)
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 4![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Reddish Brown](/media/parts/15672/70/brick-sloped-45-2-x-1-with-23-cutout-new-version-reddish-brown.jpg)
-
Plate Round Half 3 × 6 with 1 × 2 Cutout × 4
-
Fence Spindled 4 × 4 × 2 Quarter Round with 2 Studs No longer produced · last seen 2015 × 4
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (21)
These extra parts come with the set in case one gets lost.
-
Plate Round 1 × 1 with Solid Stud × 5
-
Weapon Sword / Cutlass × 3
-
Minifig Neckwear Epaulette × 2
-
Weapon Gun / Pistol Flintlock No longer produced · last seen 2016 × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Tile Round 1 × 1 × 2
-
Minifig Neckwear Epaulette × 1
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 1
-
Plate 1 × 1 × 1
-
Technic Pin 1/2 without Friction Ridges × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Leg Skeleton × 1
-
Technic Pin with Friction Ridges Lengthwise and Towball No longer produced · last seen 2020 × 1
-
Launcher Trigger, Weapon Gun Trigger × 1
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] No longer produced · last seen 2023 × 1![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Dark Bluish Gray](/media/parts/48729b/72/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-dark-bluish-gray.jpg)
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 1
-
Flame / Headwear Accessory Plume / Feather, Triple Point × 1
-
Equipment Oar / Paddle [Reinforced] × 1![Equipment Oar / Paddle [Reinforced] Reddish Brown](/media/parts/87585/70/equipment-oar-paddle-reinforced-reddish-brown.jpg)
-
Arm Skeleton Bent with Clips at 90° [Vertical Grip] × 1![Arm Skeleton Bent with Clips at 90° [Vertical Grip] White](/media/parts/93061/15/arm-skeleton-bent-with-clips-at-90-vertical-grip-white.jpg)
Minifigures 7
Description
Hull, rigging and cannons
The model's core is a two-part hull that swings open for play, revealing a small cabin inside once the deck is lifted away. Two masts carry fabric sails, and a bowsprit plus several side-mounted cannons define the ship's outline from a distance. Smaller touches such as barrels, an oar, a tiny galley and a rowing boat give the build plenty to explore up close, without cluttering the clean overall silhouette of the vessel.
Two crews, seven minifigures
Seven minifigures is a generous line-up for a set this size, splitting into a pirate crew and their rivals rather than a single uniform boarding party. Weapons, headgear and unique printing keep every figure distinct, which makes the set worth a look for anyone who collects minifigures on their own merits. For children, the larger cast supports proper back-and-forth play, from a chase across the deck to boarding, capture and escape at sea.
A muted, piratical colour scheme
223 unique parts go into the build, well above what the 745-piece total alone suggests, since many elements are repeated several times throughout the model. The palette of reddish brown, black, red and dark tan stays deliberately subdued rather than leaning on bright, toyish colours, fitting the pirate theme it depicts. Anyone curious about exactly which colours and shapes are involved can browse the full parts list on this page, sorted by colour.
Display piece or play set
Because the cabin opens up, the Brick Bounty stays a genuine play set after building rather than becoming a static shelf piece, setting it apart from many display-only ship models. At the same time, the level of hull detail and the coherent colour scheme mean it stands up well when simply displayed too. Owners of other Pirates-themed sets will find the rigging, barrels and cannon parts mix well into their own custom builds. It also makes a fitting gift for fans of sailing ships and adventure stories.
FAQ
- How many pieces does the Brick Bounty have?
- Set 70413 contains 745 pieces across 223 unique parts, spread across the hull, rigging and accessories.
- How many minifigures come with the set?
- Seven minifigures are included, split between the pirate crew and their rivals, which supports several different play scenes.
- Does the ship open up for play?
- Yes, the hull is built in two hinged halves that swing open, giving access to the small cabin inside.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



