
Creative Ambush
Creative Ambush drops you into the wild grassland of The LEGO Movie world, where everyday parts turn into improvised vehicles. Across 474 pieces and 4 minifigures, the set builds an ambush scene made from crooked, unusually combined elements. Dark grey tones and reddish brown give the model the scrappy, hand-built look the film made famous.
- Set number
- 70812
- Year
- 2014
- Pieces
- 474
- Minifigures
- 4
- Theme
- The LEGO Movie
- Different parts
- 176
Parts list 176
-
Brick Special 1 × 2 Palisade [aka Log]
× 11
-
Technic Axle 2 Notched
× 10
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening]
No longer produced · last seen 2016
× 10
-
Plate 2 × 3
× 8
-
Brick Curved 1 × 2 × 1 1/3 with Curved Top
× 8
-
Hinge Cylinder 1 × 3 Locking with 1 Finger and Technic Friction Pin with Round Hole
No longer produced · last seen 2020
× 8
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 8
-
Tile Special 1 × 2 Grille with Bottom Groove
× 6
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud]
× 6
-
Plate 4 × 4
× 6
-
Brick Sloped Inverted 45° 4 × 2 Double with 2 × 2 Recessed
× 6
-
Plate Round 1 × 1 with Solid Stud
× 6
-
Plate Round 1 × 1 with Solid Stud
× 6
-
Plate Special 1 × 1 with Clip Vertical [Thick Open O Clip]
× 6
-
Panel 1 × 2 × 2 [Side Supports / Hollow Studs]
× 6
-
Plate 1 × 6
× 5
-
Brick Special 1 × 2 with 2 Studs on 1 Side
× 5
-
Brick Special 1 × 4 with 4 Studs on One Side
× 5
-
Wedge Plate 4 × 2 Right
× 5
-
Wedge Plate 4 × 2 Left
× 5
-
Cone 1 × 1 [Top Groove]
× 5
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate
× 5
-
Plate 2 × 8
× 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges]
× 4
-
Tile Special Round 2 × 2 with Hole
× 4
-
Tile Special 1 × 2 Grille with Bottom Groove
× 4
-
Plate 1 × 2
× 4
-
Hinge Cylinder 1 × 2 Locking with 2 Click Fingers and Axle Hole, 9 Teeth
No longer produced · last seen 2020
× 4
-
Brick Round 1 × 1 Open Stud
× 4
-
Plate Special 3 × 2 with Rounded End, Hole
× 4
-
Technic Brick 1 × 2 [1 Pin Hole]
× 4
-
Plate 1 × 4
× 4
-
Plate 1 × 4
× 4
-
Plate 1 × 4
× 4
-
Technic Axle and Pin Connector Angled #3 - 157.5°
× 4
-
Support Round 2 × 2 × 2 Stand with Reach-Through Center Hole
No longer produced · last seen 2014
× 4
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 4
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 4
-
Technic Pin 1/2 without Friction Ridges
× 4
-
Brick Special 1 × 1 with Clip Vertical [Thick U Clip, Solid Stud]
No longer produced · last seen 2014
× 4
-
Plate Round 1 × 1 with Solid Stud
× 4
-
Panel 1 × 1 × 1 Corner
× 4
-
Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes
× 4
-
Plate Special 1 × 2 with Handle on End [Closed Ends]
× 4
-
Equipment Telescope / Torch / Spyglass, Support Round 1 × 1 × 1 2/3
× 4
-
Bracket 1 × 2 - 1 × 2 Inverted
× 4
-
Bracket 1 × 2 - 1 × 2
× 4
-
Tile Special 1 × 2 Grille with Bottom Groove
× 3
-
Plate Special 1 × 2 with 1 Stud with Groove (Jumper)
No longer produced · last seen 2017
× 3
-
Plate Round 2 × 2 with Axle Hole Type 1 (+ Opening)
× 3
-
Window 1 × 2 × 3 Shutter with Hinges and No Handle
No longer produced · last seen 2014
× 3
-
Brick Curved 2 × 4 × 1 1/3
No longer produced · last seen 2024
× 3
-
Plate Special 1 × 4 with Angled Tubes
× 3
-
Technic Pin 1/2 with 2L Bar Extension
× 3
-
Technic Gear 16 Tooth Reinforced [New Style]
× 3
-
Wing, Tail 4 × 1 × 3
No longer produced · last seen 2024
× 2
-
Tile Special 1 × 2 Grille with Bottom Groove
× 2
-
Tile Special 2 × 2 with Top Pin
No longer produced · last seen 2020
× 2
-
Plate Special 2 × 2 with Pin on Bottom
× 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (18)
These extra parts come with the set in case one gets lost.
-
Tap 1 × 1 without Hole in Spout
× 2
-
Tap 1 × 1 without Hole in Spout
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Plate Round 1 × 1 with Solid Stud
× 2
-
Lever Small Base with Black Lever
× 1
-
Lever Small Base with Black Lever
× 1
-
Brick Round 1 × 1 Open Stud
× 1
-
Brick Round 1 × 1 Open Stud
× 1
-
Tile 1 × 1 with White and Red Gauge Print
No longer produced · last seen 2022
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Weapon Gun / Pistol / Revolver Large Barrel, Long Grip
× 1
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small
× 1
-
Hose Rigid 3mm D. 3L / 2.4cm
No longer produced · last seen 2016
× 1
-
Tile Round 1 × 1
× 1
Minifigures 4
-
Executive Ellen
× 1
-
Rootbeer Belle
× 1
-
Sudds Backwash
× 1
-
Kebab Bob
× 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
What can I build with it?Description
Building the film's signature style
The LEGO Movie popularised a distinct building style in 2014, where vehicles look deliberately improvised, as if characters had bolted them together from whatever parts were lying around. Creative Ambush carries that idea through a model full of odd angles and unconventional part connections. Rather than a smooth body shell, the build shows exposed struts, pipes and grabbing arms that suggest a makeshift war machine. Fans of the film will instantly recognise the visual language of the story's ragtag builders. That same rough-edged approach also appeals to experienced builders who enjoy free-form construction beyond standard sets.
Earthy colours with a purpose
Dark Bluish Grey and Black form the frame, with Reddish Brown adding warm accents across struts and details. Light Bluish Grey rounds out the palette quietly, adding contrast without breaking the improvised feel. This muted colour choice sets the set apart from the brighter, friendlier tones used elsewhere in The LEGO Movie range, and suits an ambush scene built around camouflage rather than spectacle. The parts list on this page shows exactly how the 176 unique parts split across these four main colours.
Four minifigures for a chase scene
With 4 minifigures, the set carries enough cast for small chase scenes and role play without feeling crowded. The mix of hero and rival characters leaves room to replay moments from the film or invent entirely new stories in the wider LEGO Movie world. For children who have seen the film, spotting the familiar building style adds an extra layer of fun during play. At a compact 474 pieces, the set is realistic to finish in a single afternoon.
Unusual parts for new builds
Creative Ambush includes 176 unique parts, many in the special shapes typical of the LEGO Movie range's improvised look. Struts, grab elements and specialist pieces in Dark Bluish Grey and Reddish Brown work well in custom vehicle builds, especially where a rough, industrial finish is the goal. The full parts list on this page lists every element by colour and quantity, making individual pieces easy to look up. That turns the finished model into a useful source for your own creations.
FAQ
- How many pieces does Creative Ambush have?
- Set 70812 has 474 pieces, including 176 unique elements across four main colours.
- How many minifigures are included?
- The set comes with 4 minifigures, suited to small chase and role-play scenes.
- What colours define the set?
- Dark Bluish Grey, Black, Reddish Brown and Light Bluish Grey give the model its muted, improvised look.



