
Parts list 100
-
Plate 1 × 2 × 12
-
Tile Special 1 × 2 Grille with Bottom Groove × 10
-
Technic Rotation Joint Ball Loop with Two Perpendicular Pins with Friction No longer produced · last seen 2006 × 10
-
Cone 1 × 1 [No Top Groove] No longer produced · last seen 2009 × 9![Cone 1 × 1 [No Top Groove] Trans-Red](/media/parts/4589/36/cone-1-x-1-no-top-groove-trans-red.jpg)
-
Brick Curved 3 × 1 No Studs × 8
-
Arm Mechanical with Clip [Thin Support] No longer produced · last seen 2011 × 8![Arm Mechanical with Clip [Thin Support] Pearl Light Gray](/media/parts/53989/135/arm-mechanical-with-clip-thin-support-pearl-light-gray.jpg)
-
Plate 2 × 2 × 7
-
Technic Brick 1 × 2 [1 Pin Hole] × 7![Technic Brick 1 × 2 [1 Pin Hole] Black](/media/parts/3700/0/technic-brick-1-x-2-1-pin-hole-black.jpg)
-
Plate 2 × 2 Corner × 6
-
Technic Pin 1/2 without Friction Ridges × 6
-
Technic Axle 3 with Stud No longer produced · last seen 2019 × 6
-
Hinge Plate 1 × 8 Locking with Angled Side Extensions, Rounded Plate Underside, 9 Teeth No longer produced · last seen 2011 × 6
-
Hinge Cylinder 1 × 3 Locking with 1 Finger and Technic Friction Pin with Round Hole No longer produced · last seen 2020 × 6
-
Plate Special 1 × 2 Side Handle [Free Ends] × 4![Plate Special 1 × 2 Side Handle [Free Ends] Light Bluish Gray](/media/parts/2540/71/plate-special-1-x-2-side-handle-free-ends-light-bluish-gray.jpg)
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 4
-
Plate 1 × 1 × 4
-
Plate 1 × 3 × 4
-
Technic Pin without Friction Ridges Lengthwise × 4
-
Technic Brick 1 × 1 with Pin Hole × 4
-
Technic Brick 1 × 2 [2 Pin Holes] × 4![Technic Brick 1 × 2 [2 Pin Holes] Yellow](/media/parts/32000/14/technic-brick-1-x-2-2-pin-holes-yellow.jpg)
-
Technic Axle 2 Notched × 4
-
Technic Axle Pin with Friction Ridges Lengthwise × 4
-
Brick Wedged, Curved 6 × 4 Triple No longer produced · last seen 2015 × 4
-
Bracket 1 × 2 - 2 × 2 × 4
-
Technic Brick Special 2 × 3 with Pin Holes, Rotation Joint Ball Half [Vertical Side], Rotation Joint Socket No longer produced · last seen 2007 × 4![Technic Brick Special 2 × 3 with Pin Holes, Rotation Joint Ball Half [Vertical Side], Rotation Joint Socket Dark Bluish Gray](/media/parts/47432/72/technic-brick-special-2-x-3-with-pin-holes-rotation-joint-ball-half-vertical-side-rotation-joint-socket-dark-bluish-gray.jpg)
-
Brick Wedged, Curved 4 × 4 No Top Studs No longer produced · last seen 2011 × 4
-
Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] × 4![Technic Brick Special 2 × 2 with Pin Hole, Rotation Joint Ball Half [Horizontal Top] Dark Bluish Gray](/media/parts/48170/72/technic-brick-special-2-x-2-with-pin-hole-rotation-joint-ball-half-horizontal-top-dark-bluish-gray.jpg)
-
Technic Axle Connector Ridged [with x Hole x Orientation] No longer produced · last seen 2007 × 4![Technic Axle Connector Ridged [with x Hole x Orientation] Red](/media/parts/6538b/4/technic-axle-connector-ridged-with-x-hole-x-orientation-red.jpg)
-
Cone 1 × 1 [No Top Groove] No longer produced · last seen 2009 × 3![Cone 1 × 1 [No Top Groove] Red](/media/parts/4589/4/cone-1-x-1-no-top-groove-red.jpg)
-
Brick Curved 2 × 2 with Lip, No Studs No longer produced · last seen 2022 × 3
-
Technic Beam 1 × 5 Thick × 3
-
Tile Special 1 × 2 Grille with Bottom Groove × 2
-
Wedge Plate 3 × 6 Cut Corners × 2
-
Tile 1 × 4 with Groove × 2
-
Bracket 1 × 2 - 1 × 4 [Square Corners] No longer produced · last seen 2016 × 2![Bracket 1 × 2 - 1 × 4 [Square Corners] Black](/media/parts/2436/0/bracket-1-x-2-1-x-4-square-corners-black.jpg)
-
Plate Special 2 × 2 with 1 Pin Hole [Split Underside Ribs] No longer produced · last seen 2013 × 2![Plate Special 2 × 2 with 1 Pin Hole [Split Underside Ribs] Yellow](/media/parts/2444/14/plate-special-2-x-2-with-1-pin-hole-split-underside-ribs-yellow.jpg)
-
Plate Special 1 × 2 Side Handle [Free Ends] × 2![Plate Special 1 × 2 Side Handle [Free Ends] Red](/media/parts/2540/4/plate-special-1-x-2-side-handle-free-ends-red.jpg)
-
Tile Special 1 × 1 with Clip and Straight Tips No longer produced · last seen 2012 × 2
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 2![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Black](/media/parts/2654/0/plate-round-2-x-2-with-rounded-bottom-boat-stud-black.jpg)
-
Technic Beam 1 × 4 Thin with Stud Connector × 2
-
Brick 2 × 2 × 2
-
Brick 1 × 2 × 2
-
Plate 2 × 4 × 2
-
Plate 2 × 3 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 2 × 2
-
Technic Plate 2 × 6 [5 Holes] No longer produced · last seen 2013 × 2![Technic Plate 2 × 6 [5 Holes] Yellow](/media/parts/32001/14/technic-plate-2-x-6-5-holes-yellow.jpg)
-
Technic Axle and Pin Connector Angled #5 - 112.5° No longer produced · last seen 2014 × 2
-
Technic Axle Connector with Axle Hole No longer produced · last seen 2020 × 2
-
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] No longer produced · last seen 2021 × 2![Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] Black](/media/parts/32054/0/technic-pin-long-with-friction-ridges-lengthwise-and-stop-bush-3-lateral-holes-big-pin-hole-black.jpg)
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening] No longer produced · last seen 2016 × 2![Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening] Dark Bluish Gray](/media/parts/32064b/72/technic-brick-1-x-2-with-axle-hole-type-2-x-opening-dark-bluish-gray.jpg)
-
Technic Beam 2 × 4 L-Shape Thick × 2
-
Engine - Smooth, Small 1 × 2 Side Plate [With Axle Holders] No longer produced · last seen 2012 × 2![Engine - Smooth, Small 1 × 2 Side Plate [With Axle Holders] Dark Bluish Gray](/media/parts/3475b/72/engine-smooth-small-1-x-2-side-plate-with-axle-holders-dark-bluish-gray.jpg)
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] × 2![Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes] Dark Bluish Gray](/media/parts/3660/72/brick-sloped-inverted-45-2-x-2-ovoid-bottom-pin-bar-sized-stud-holes-dark-bluish-gray.jpg)
-
Technic Axle 8 × 2
-
Technic Plate 2 × 4 [3 Holes] No longer produced · last seen 2010 × 2![Technic Plate 2 × 4 [3 Holes] Yellow](/media/parts/3709/14/technic-plate-2-x-4-3-holes-yellow.jpg)
-
Plate 1 × 4 × 2
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper) No longer produced · last seen 2014 × 2
-
Technic Brick 1 × 6 [5 Pin Holes] × 2![Technic Brick 1 × 6 [5 Pin Holes] Yellow](/media/parts/3894/14/technic-brick-1-x-6-5-pin-holes-yellow.jpg)
-
Hinge Brick 1 × 2 Base × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (4)
These extra parts come with the set in case one gets lost.
Minifigures 1
-
Takeshi
× 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
View the idea at Rebrickable ↗
What can I build with it?Description
What kind of set is it?
Exo-Force was built around battle robots and the pilots who control them, with a style borrowed from Japanese mecha stories. Supernova was released in 2006 as part of that line and includes one minifigure to go with the machine. That makes it more than a shelf model: it was designed for play, with the figure and the robot working as a team. Anyone who remembers the range will spot the angular, technical look straight away.
Colours and variety
The main colours are black, yellow, red and dark bluish grey. That mix gives the model a high-contrast appearance, with dark surfaces forming the base and yellow and red picking out the details. Of the 287 pieces, 89 are different elements, which is a fairly wide variety for the size. It points to a build made of joints and attachments rather than a pile of identical bricks, and that is exactly what makes mechs so interesting to put together.
Building time and display
At just under 300 pieces, Supernova can be finished in a single afternoon, even by someone new to the line. Movement matters most on a mech, so it is worth testing the joints once the build is done and trying out a few poses. If you display the set, the minifigure gives a useful sense of how large the robot really is. In play it holds up well, though it is wise to check for loose pieces after a big battle.
Reusing the pieces
This page lists every one of the 89 different elements. If you own the set, or have similar parts in an old box, the “What can I build?” tool shows which other models can be assembled from them. The black and dark grey parts in particular are very versatile, whether for your own robots, vehicles or technical details. That turns a single set into a small construction kit that reaches well beyond the original model.
FAQ
- How many pieces does Supernova have?
- The 2006 set contains 287 pieces, 89 of them different, plus one minifigure.
- Which theme does it belong to?
- Supernova is part of Exo-Force, a line centred on robots and their pilots.
- Can I build something else with these parts?
- Yes, the “What can I build?” tool on this page shows which models your parts can make.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.




