
LEGO® Monkie Kid's Team Dronecopter
LEGO® Monkie Kid's Team Dronecopter is a 1,471-piece set built around a flexible flying vehicle and nine minifigures – an unusually high figure count for a single Monkie Kid box. It draws on the animated series' mix of Chinese mythology and near-future tech. This page breaks down all 471 unique parts and the set's colour scheme.
- Set number
- 80023
- Year
- 2021
- Pieces
- 1,471
- Minifigures
- 9
- Theme
- Monkie Kid
- Different parts
- 471
Parts list 471
-
Plate Special 1 × 2 Rounded with 2 Open Studs × 27
-
Tile Special 1 × 2 Grille with Bottom Groove × 26
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 19
-
Brick Round Corner 5 × 5 × 1 Curved, Bottom Cut Outs, No Studs, 7 Bottom Tubes No longer produced · last seen 2021 × 16
-
Bar Holder with Clip and 90° Angle (Mechanical Leg) × 16
-
Technic Axle 2 Notched × 14
-
Plate 2 × 2 Corner × 12
-
Technic Slope Long 1 × 6 with 3 Pin Holes No longer produced · last seen 2022 × 12
-
Plate Round 1 × 1 with Solid Stud × 12
-
Panel 1 × 6 × 5 [Vertical Corrugated] × 12![Panel 1 × 6 × 5 [Vertical Corrugated] Dark Turquoise](/media/parts/23405/3/panel-1-x-6-x-5-vertical-corrugated-dark-turquoise.jpg)
-
Tile 45° Cut 2 × 2 (Triangle) × 12
-
Technic Axle Pin with Friction Ridges Lengthwise × 12
-
Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] No longer produced · last seen 2022 × 12![Hinge Plate 1 × 4 Swivel Top / Base - Solid Clip [Complete Assembly] Yellow](/media/parts/73983/14/hinge-plate-1-x-4-swivel-top-base-solid-clip-complete-assembly-yellow.jpg)
-
Bracket 1 × 2 - 1 × 2 Inverted × 12
-
Bracket 1 × 2 - 1 × 2 × 12
-
Plate Round 1 × 1 with Solid Stud No longer produced · last seen 2023 × 11
-
Plate Round 1 × 1 with Open Stud × 11
-
Plate 1 × 2 × 10
-
Tile Special 1 × 2 Grille with Bottom Groove × 9
-
Plate 2 × 4 × 9
-
Plate Round 1 × 1 with Open Stud × 9
-
Plate 2 × 3 × 8
-
Plate 2 × 2 × 8
-
Plate 1 × 2 × 8
-
Plate 1 × 2 × 8
-
Plate 1 × 6 × 8
-
Technic Plate 2 × 8 [7 Holes] × 8![Technic Plate 2 × 8 [7 Holes] Dark Bluish Gray](/media/parts/3738/72/technic-plate-2-x-8-7-holes-dark-bluish-gray.jpg)
-
Brick Special 1 × 1 with Headlight × 8
-
Brick Special 1 × 1 with Headlight × 8
-
Plate Special 1 × 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) × 8
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 8![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Dark Bluish Gray](/media/parts/15672/72/brick-sloped-45-2-x-1-with-23-cutout-new-version-dark-bluish-gray.jpg)
-
Wedge Plate 4 Stud 45° Angle Plate × 8
-
Tile Special 2 × 3 Pentagonal × 8
-
Plate Special 2 × 2 with Pin on Bottom × 8
-
Tile Round 1 × 1 Quarter × 8
-
Wedge Plate 4 × 4 Cut Corner × 8
-
Bracket 1 × 2 - 2 × 2 × 8
-
Animal Body Part, Barb / Claw / Tooth / Talon / Horn, Small × 8
-
Cone 1 × 1 [Top Groove] × 8![Cone 1 × 1 [Top Groove] Black](/media/parts/59900/0/cone-1-x-1-top-groove-black.jpg)
-
Weapon Gun Automatic Pistol Medium Barrel × 8
-
Plate Round 1 × 1 with Open Stud × 8
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] No longer produced · last seen 2023 × 8![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] Light Bluish Gray](/media/parts/99206/71/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-solid-anti-stud-light-bluish-gray.jpg)
-
Bracket 1 × 2 - 1 × 2 Inverted × 8
-
Tile Special 1 × 2 Grille with Bottom Groove × 7
-
Plate 1 × 2 × 6
-
Tile Special 2 × 2 Inverted × 6
-
Plate Special 1 × 2 with Clip Horizontal on Side × 6
-
Projectile, Spring Shooter Ammunition 8L Bar × 6
-
Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] × 6![Brick Sloped 45° 2 × 1 with 2/3 Cutout [New Version] Red](/media/parts/15672/4/brick-sloped-45-2-x-1-with-23-cutout-new-version-red.jpg)
-
Tile Special 1 × 1 with Clip with Rounded Edges × 6
-
Brick Round 1 × 1 Open Stud × 6
-
Plate 1 × 4 × 6
-
Plate Round 1 × 1 with Solid Stud × 6
-
Technic Axle and Pin Connector Angled #3 - 157.5° × 6
-
Technic Pin Long with Friction Ridges Lengthwise, 1 Center Slot × 6
-
Plate Special 1 × 2, Top Clip [Open O] × 6![Plate Special 1 × 2, Top Clip [Open O] Light Bluish Gray](/media/parts/44861/71/plate-special-1-x-2-top-clip-open-o-light-bluish-gray.jpg)
-
Brick Wedged, Curved 2 × 3 × 2/3 Two Studs, Wing End × 6
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] No longer produced · last seen 2023 × 6![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Dark Bluish Gray](/media/parts/48729b/72/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-dark-bluish-gray.jpg)
-
Plate Special 1 × 2 with Handle on End [Closed Ends] × 6![Plate Special 1 × 2 with Handle on End [Closed Ends] Light Bluish Gray](/media/parts/60478/71/plate-special-1-x-2-with-handle-on-end-closed-ends-light-bluish-gray.jpg)
-
Brick Sloped 18° 2 × 1 × 2/3 with 4 Slots / Grate × 6
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (62)
These extra parts come with the set in case one gets lost.
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Technic Bush × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud No longer produced · last seen 2023 × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud × 1
-
Plate Round 1 × 1 with Solid Stud No longer produced · last seen 2024 × 1
-
Technic Pin Connector Round 1L [Beam] × 1![Technic Pin Connector Round 1L [Beam] Dark Turquoise](/media/parts/18654/3/technic-pin-connector-round-1l-beam-dark-turquoise.jpg)
-
Technic Pin Connector Round 1L [Beam] × 1![Technic Pin Connector Round 1L [Beam] Pearl Titanium](/media/parts/18654/1103/technic-pin-connector-round-1l-beam-pearl-titanium.jpg)
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Tile Special Round 1 × 1 with Hollow Bar × 1
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 1![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Bright Green](/media/parts/22388/10/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-bright-green.jpg)
-
Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] × 1![Brick Sloped 45° 1 × 1 × 2/3 Quadruple Convex [Pyramid] Trans-Bright Green](/media/parts/22388/35/brick-sloped-45-1-x-1-x-23-quadruple-convex-pyramid-trans-bright-green.jpg)
-
Tile Round 1 × 1 Quarter × 1
-
Tile Round 1 × 1 Quarter × 1
-
Rock 1 × 1 Jewel / Gem 24 Facet × 1
Minifigures 9
-
Sandy (Big Fig)
× 1
-
Huntsman
× 1
-
Mei, Pearl Gold Armor
× 1
-
Spider Queen
× 1
-
Syntax
× 1
-
Mr Tang
× 1
-
Fei
× 1
-
Red Son with Neck Bracket with 4 Bars
× 1
-
Monkie Kid, Dark Turquoise Hood, Happy
× 1
Description
Nine minifigures in one box
Getting nine minifigures in a single set is rare for LEGO, and it's one of the main reasons collectors pick this set up. Rather than spreading a team across several boxes, the Dronecopter keeps the whole Monkie Kid crew and its opponents together, so you can recreate full scenes from the show straight out of the box. The vehicle itself is built to seat several figures at once, with more than one cockpit area and docking points along the frame. For anyone building a complete Monkie Kid display, that line-up is hard to match with the smaller sets in the range.
A build for confident LEGO fans
At close to 1,500 pieces, this is a longer build than most Monkie Kid sets, better suited to builders who already have some experience with larger models. The payoff is a vehicle that actually functions as a plaything once finished, with room for the minifigures to interact rather than just stand around it. Parents buying for younger fans of the show should expect a multi-session build rather than an afternoon project. Once complete, the scale of the model and the sheer number of characters make it one of the more satisfying sets in the theme to display or play with.
Black, red and yellow against grey
The set leans on black, red, light bluish grey and yellow, a combination that reads as functional rather than decorative – dark panelling for the hull, red marking the hero team, yellow picking out edges and warning details, and grey filling in structural elements like struts and rotors. It's a noticeably different palette from the earthier tones used in traditional fantasy sets, and it keeps the model easy to read at a glance. The exact split between colours is listed alongside the full parts inventory further down this page.
471 unique parts to build with
Of the 1,471 pieces, 471 are unique shapes, a solid ratio for a set this size and a sign that the box favours variety over large numbers of identical bricks. That mix is useful beyond the finished model: Technic-style connectors, weapon accessories and other specialised pieces from the Monkie Kid range work well combined with other sets in the theme or folded into original builds. For young builders who like designing their own vehicles, a varied parts mix like this tends to go further than a set built mostly from a handful of oversized plates.
FAQ
- How many pieces does Monkie Kid's Team Dronecopter have?
- Set 80023 contains 1,471 pieces, including 471 unique parts, all listed individually on this page.
- How many minifigures come with the set?
- The set includes nine minifigures, an unusually high number for a single Monkie Kid set and enough to recreate full scenes from the show.
- What colours make up the model?
- Black, red, light bluish grey and yellow dominate the vehicle; the exact colour breakdown is shown in the parts list above.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



