
Parts list 38
-
Plate 2 × 2 × 6
-
Technic Pin 1/2 without Friction Ridges × 6
-
Plate 1 × 2 × 4
-
Plate 1 × 6 × 4
-
Technic Bush × 4
-
Wheel 18mm x 14mm with Axle Hole, Fake Bolts and Shallow Spokes × 4
-
Tyre 30.4 × 14 VR Solid × 4
-
Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] No longer produced · last seen 2012 × 4![Brick Curved 4 × 1 No Studs [Stud Holder with Asymmetric Ridges] Yellow](/media/parts/61678/14/brick-curved-4-x-1-no-studs-stud-holder-with-asymmetric-ridges-yellow.jpg)
-
Wheel Cover 9 Spoke - 24mm D. No longer produced · last seen 2018 × 4
-
Tile 1 × 4 with Groove × 2
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Brick Sloped 45° 2 × 2 × 2
-
Plate 1 × 4 × 2
-
Tile 1 × 6 with Groove × 2
-
Technic Brick 1 × 14 [13 Pin Holes] × 2![Technic Brick 1 × 14 [13 Pin Holes] Black](/media/parts/32018/0/technic-brick-1-x-14-13-pin-holes-black.jpg)
-
Wedge Plate 4 × 2 Right × 2
-
Wedge Plate 4 × 2 Right × 2
-
Wedge Plate 4 × 2 Left × 2
-
Wedge Plate 4 × 2 Left × 2
-
Brick Sloped 30° 1 × 1 × 2/3 (Cheese Slope) × 2
-
Technic Axle 9 × 2
-
Panel 1 × 2 × 2 [Side Supports / Hollow Studs] × 2![Panel 1 × 2 × 2 [Side Supports / Hollow Studs] Black](/media/parts/87552/0/panel-1-x-2-x-2-side-supports-hollow-studs-black.jpg)
-
Wedge Plate 3 × 6 Cut Corners × 1
-
Brick Special 1 × 2 with Pin No longer produced · last seen 2022 × 1
-
Plate 2 × 4 × 1
-
Plate 2 × 4 × 1
-
Plate 4 × 4 × 1
-
Plate 4 × 8 × 1
-
Tile 2 × 2 with Groove × 1
-
Plate 2 × 6 × 1
-
Brick Sloped 18° 4 × 2 No longer produced · last seen 2022 × 1
-
Brick Wedged, Curved 4 × 4 No Top Studs × 1
-
Technic Pin Connector Round [Slotted] × 1![Technic Pin Connector Round [Slotted] White](/media/parts/62462/15/technic-pin-connector-round-slotted-white.jpg)
-
Launcher Base, Air Blast [Racers] No longer produced · last seen 2011 × 1![Launcher Base, Air Blast [Racers] Dark Bluish Gray](/media/parts/87941/72/launcher-base-air-blast-racers-dark-bluish-gray.jpg)
-
Launcher, Air Blast Pump [Racers] No longer produced · last seen 2011 × 1![Launcher, Air Blast Pump [Racers] Lime](/media/parts/87943/27/launcher-air-blast-pump-racers-lime.jpg)
-
Launcher, Air Blast Receiver [Racers] No longer produced · last seen 2011 × 1![Launcher, Air Blast Receiver [Racers] Dark Bluish Gray](/media/parts/87944/72/launcher-air-blast-receiver-racers-dark-bluish-gray.jpg)
-
Launcher, Air Blast Injector [Racers] No longer produced · last seen 2011 × 1![Launcher, Air Blast Injector [Racers] Dark Bluish Gray](/media/parts/88496/72/launcher-air-blast-injector-racers-dark-bluish-gray.jpg)
-
Sticker Sheet for Set 8228-1 No longer produced · last seen 2011 × 1![Sticker Sheet for Set 8228-1 [No Color/Any Color]](/media/parts/93912/9999/sticker-sheet-for-set-8228-1-no-colorany-color.jpg)
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (4)
These extra parts come with the set in case one gets lost.
Description
A quick race car for a spare evening
The Racers range focuses on small, speedy vehicles that are made for racing across a table. With 82 pieces, the Sting Striker sits squarely in that tradition. The build is easy to follow, the shape is low and aggressive, and the finished model rolls well when given a push. If you want a large set, look elsewhere, but for a brisk project on a single evening this one does the job nicely. Together with other vehicles from the line you can stage a small race with a start, a finish and spectators, which goes down well with children and collectors alike.
A striking colour scheme
Black and yellow are the main colours, joined by light bluish grey and blue. The mix recalls warning colours and gives the car a look that brings wasps to mind, which fits the name. Among the 82 pieces there are 35 different element types, a wide variety for such a compact set. They include special body panels that give the racer its distinctive shape. The high-contrast colouring makes the car easy to recognise from a distance, and the grey parts give it a technical impression that suits a racing vehicle.
For racing and for the shelf
Race cars are meant to be driven, and the Sting Striker can roll against other Racers vehicles across a table or carpet. With so few parts, it usually survives a tumble without much repair. As a collectable it looks good next to other models from the line, and since no figures are included there is plenty of room for your own drivers or stories about the track and the garage. If you like arranging your shelf, you can angle the car or prop it on a small ramp so that the shape and the colours catch the eye even better.
Recombining the bricks
If you have built the set and want to reuse the pieces later, the “What can I build?” tool on this page suggests models from other sets that fit. The yellow and black bricks are especially popular for vehicles, construction machines and details. The parts list also names every element separately, so you can track down one specific piece. With a bit of imagination the bricks later become another vehicle, a motorbike or a small spaceship, since body panels are in demand across many themes.
FAQ
- How many pieces does the Sting Striker have?
- Set 8228-1 has 82 pieces, 35 of them different element types. There are no minifigures.
- Which theme is it from?
- It belongs to the Racers line and was released in 2011.
- What colours does the car use?
- Black and yellow dominate, with light bluish grey and blue as extras. The parts list shows the complete breakdown.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



