
Parts list 27
-
Projectile, Large Figure Weapon, Ammo (Cordak) No longer produced · last seen 2007 × 9
-
Technic Axle Connector 2 × 3 with Ball Socket, Open Sides No longer produced · last seen 2007 × 7
-
Technic Axle and Pin Connector 2 × 7 with Two Ball Joint Sockets No longer produced · last seen 2007 × 4
-
Technic Axle 3 × 3
-
Technic Pin with Friction Ridges Lengthwise and Center Slots No longer produced · last seen 2021 × 2
-
Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] No longer produced · last seen 2021 × 2![Technic Pin Long with Friction Ridges Lengthwise and Stop Bush [3 Lateral Holes, Big Pin Hole] Black](/media/parts/32054/0/technic-pin-long-with-friction-ridges-lengthwise-and-stop-bush-3-lateral-holes-big-pin-hole-black.jpg)
-
Technic Axle 2 Notched × 2
-
Technic Axle Pin with Friction Ridges Lengthwise × 2
-
Large Figure Skeletal, Limb, with 2 Ball Joints (Toa Metru) No longer produced · last seen 2009 × 2
-
Large Figure Skeletal, Torso with Beam, 2 Ball Joints, and 7 Tooth Half Gear No longer produced · last seen 2009 × 2
-
Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] × 2![Bar 1L with Clip [Cut Edges and One Side Hole] [Gap in Clip] Black](/media/parts/48729b/0/bar-1l-with-clip-cut-edges-and-one-side-hole-gap-in-clip-black.jpg)
-
Large Figure Limb Cover (Toa Inika) No longer produced · last seen 2008 × 2
-
Large Figure Limb Cover / Torso Cover (Toa Inika) No longer produced · last seen 2007 × 2
-
Large Figure Skeletal, Limb, with 2 Ball Joints (Toa Inika) No longer produced · last seen 2007 × 2
-
Large Figure Foot, Toa Inika Elliptical No longer produced · last seen 2008 × 2
-
Large Figure Wing / Fin (Hahli Mahri) No longer produced · last seen 2007 × 2
-
Technic Pin 1/2 without Friction Ridges × 1
-
Technic Axle and Pin Connector Perpendicular × 1
-
Large Figure Head Connector Block (Toa Metru) No longer produced · last seen 2009 × 1
-
Large Figure Head Connector Block Eye/Brain Stalk (Toa Metru) No longer produced · last seen 2008 × 1
-
Large Figure Skeletal, Torso with 2 Ball Joints (Piraka) No longer produced · last seen 2007 × 1
-
Launcher, Large Figure Weapon Cannon, Cordak Blaster No longer produced · last seen 2007 × 1
-
Large Figure Mask Faxon No longer produced · last seen 2007 × 1
-
Flexible Ribbed Hose 8mm Ends 19L No longer produced · last seen 2010 × 1
-
Large Figure Weapon Blade, Protosteel Talon (Hahli Mahri) No longer produced · last seen 2007 × 1
-
Large Figure Mask / Visor with Axle Hole No longer produced · last seen 2008 × 1
-
Light Cover 1 × 1 Round with Internal Bar / Bionicle Barraki Eye No longer produced · last seen 2016 × 1
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (1)
These extra parts come with the set in case one gets lost.
Description
A small figure with plenty of joints
At 58 pieces, Hahli sits at the small end of the Bionicle range. Even so, it contains 27 different part types, which is a respectable number for the size. Most of them are ball joints, axles and connectors that give the figure its movement. If you have built Bionicle figures before, you know the principle: instead of stacking bricks you assemble a body from sockets and rods. Once finished, the figure can be posed in many ways without falling apart, and it feels sturdy in the hand.
Colour mix
The main colours are dark blue, lime, red and black. It is a bold combination that looks well planned. The dark blue carries the body, lime adds bright accents, and red gives the limbs some contrast. Black ties the joints together visually. Collectors who like the water-themed characters of the Bionicle story will find a coherent colour scheme here. On a shelf it sits comfortably next to other Toa figures from the same period while still being easy to tell apart from them.
Who it suits
The set was released in 2007 as part of the Toa Mahri line. Today it mainly appeals to collectors who want the line complete and to anyone who enjoys building small, poseable figures. The build is quick and makes a relaxed afternoon project. Because the pieces are small and specialised, it pays to be careful when taking the figure apart and sorting the parts afterwards. A missing joint or connector is easy to overlook and can be awkward to replace when you want to rebuild it later.
Reusing the parts
This page lists every one of the 27 part types with quantities, so you can check what is missing from your collection before you rebuild the set. If you already own the pieces, the “What can I build?” tool can suggest other models that your current stock allows. That is especially handy with figure parts, because joints and rods turn up in many custom builds and are simple to recombine into something new, whether that is a creature, a robot or a character of your own design.
FAQ
- How many pieces does Toa Mahri Hahli have?
- Set 8914-1 contains 58 pieces, with 27 different part types. There are no minifigures.
- When was it released?
- Toa Mahri Hahli came out in 2007 and belongs to the Bionicle theme.
- Can I use the parts for my own figures?
- Yes. Joints, axles and connectors work well in custom builds. The parts list on this page shows what you need.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



