
LEGO® Red Son's Inferno Jet
Red Son's Inferno Jet belongs to the 2021 LEGO® Monkie Kid range, a theme built around characters and stories loosely inspired by the Chinese legend Journey to the West. The 299-piece jet is built for Red Son, one of the series' recurring antagonists, and comes with three minifigures.
- Set number
- 80019
- Year
- 2021
- Pieces
- 299
- Minifigures
- 3
- Theme
- Monkie Kid
- Different parts
- 135
Parts list 135
-
Plate 1 × 2 × 6
-
Plate Round 1 × 1 with Solid Stud × 6
-
Brick Curved 2 × 1 No Studs [1/2 Bow] × 6![Brick Curved 2 × 1 No Studs [1/2 Bow] Red](/media/parts/11477/4/brick-curved-2-x-1-no-studs-12-bow-red.jpg)
-
Brick Curved 2 × 2 × 2/3 × 6
-
Plate 2 × 4 × 5
-
Brick Curved 2 × 2 × 2/3 × 5
-
Tile Special 1 × 2 Grille with Bottom Groove No longer produced · last seen 2024 × 5
-
Bracket 1 × 2 - 1 × 2 Inverted × 5
-
Plate 2 × 2 Corner × 4
-
Brick 1 × 1 × 4
-
Plate 2 × 2 × 4
-
Hinge Plate 1 × 2 Locking with 1 Finger On Top × 4
-
Plate Special 1 × 2 [Side Handle Closed Ends] × 4![Plate Special 1 × 2 [Side Handle Closed Ends] Light Bluish Gray](/media/parts/48336/71/plate-special-1-x-2-side-handle-closed-ends-light-bluish-gray.jpg)
-
Hinge Cylinder 1 × 2 Locking with 2 Click Fingers and Axle Hole, 7 Teeth × 4
-
Plate Special 1 × 2 with Clips Horizontal [Open O Clips] × 4![Plate Special 1 × 2 with Clips Horizontal [Open O Clips] Red](/media/parts/60470b/4/plate-special-1-x-2-with-clips-horizontal-open-o-clips-red.jpg)
-
Brick Round 2 × 2 D. Tube with 45° Elbow and Axle Holes (Crossholes) at Each End [SHORT] No longer produced · last seen 2021 × 4![Brick Round 2 × 2 D. Tube with 45° Elbow and Axle Holes (Crossholes) at Each End [SHORT] Pearl Titanium](/media/parts/65473/1103/brick-round-2-x-2-d-tube-with-45-elbow-and-axle-holes-crossholes-at-each-end-short-pearl-titanium.jpg)
-
Brick Round Corner 3 × 3 × 1 No Studs No longer produced · last seen 2022 × 4
-
Plate Round 1 × 1 with Open Stud × 4
-
Wave / Flame Rounded Large with Marbled Trans-Brown Pattern No longer produced · last seen 2023 × 4
-
Technic Axle 4 with Stop × 4
-
Brick Arch 1 × 3 × 2 × 4
-
Bracket 1 × 2 - 2 × 4 × 4
-
Plate Round 2 × 2 with Rounded Bottom [Boat Stud] × 3![Plate Round 2 × 2 with Rounded Bottom [Boat Stud] Trans-Orange](/media/parts/2654/182/plate-round-2-x-2-with-rounded-bottom-boat-stud-trans-orange.jpg)
-
Technic Plate 2 × 4 [3 Holes] × 3![Technic Plate 2 × 4 [3 Holes] Red](/media/parts/3709/4/technic-plate-2-x-4-3-holes-red.jpg)
-
Plate 1 × 4 × 3
-
Technic Axle 3 × 3
-
Cone 3 × 3 × 2 × 3
-
Projectile, Spring Shooter Ammunition 8L Bar No longer produced · last seen 2023 × 3
-
Brick Sloped 65° 2 × 1 × 2 × 3
-
Plate Special 1 × 4 with Angled Tubes × 3
-
Brick Curved 4 × 1 Double, No Studs × 3
-
Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] No longer produced · last seen 2023 × 3![Plate Special 2 × 2 × 2/3 with Two Studs On Side and Two Raised [Solid Anti-stud] Red](/media/parts/99206/4/plate-special-2-x-2-x-23-with-two-studs-on-side-and-two-raised-solid-anti-stud-red.jpg)
-
Wedge Plate 3 × 3 Cut Corner × 2
-
Brick 2 × 4 × 2
-
Brick 2 × 2 × 2
-
Brick 1 × 1 × 2
-
Plate 2 × 3 × 2
-
Plate 2 × 2 × 2
-
Plate 1 × 2 × 2
-
Plate 1 × 6 × 2
-
Plate 1 × 6 × 2
-
Technic Brick 1 × 2 [1 Pin Hole] × 2![Technic Brick 1 × 2 [1 Pin Hole] White](/media/parts/3700/15/technic-brick-1-x-2-1-pin-hole-white.jpg)
-
Technic Brick 1 × 16 [15 Pin Holes] × 2![Technic Brick 1 × 16 [15 Pin Holes] Black](/media/parts/3703/0/technic-brick-1-x-16-15-pin-holes-black.jpg)
-
Technic Bush × 2
-
Technic Axle Pin without Friction Ridges Lengthwise × 2
-
Plate 2 × 6 × 2
-
Dish 2 × 2 Inverted [Radar] × 2![Dish 2 × 2 Inverted [Radar] Trans-Orange](/media/parts/4740/182/dish-2-x-2-inverted-radar-trans-orange.jpg)
-
Technic Beam 1 × 3 Thin × 2
-
Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] × 2![Brick Curved 4 × 1 No Studs [Stud Holder with Symmetric Ridges] Dark Red](/media/parts/11153/320/brick-curved-4-x-1-no-studs-stud-holder-with-symmetric-ridges-dark-red.jpg)
-
Plate Special 1 × 2 with Clip Horizontal on Side × 2
-
Cone 1 × 1 Inverted with Bar at Bottom (Ice Cream Cone) × 2
-
Launcher, Brick Special 1 × 4 Spring Shooter with Light Bluish Gray Top × 2
-
Tile Special Round 2 × 2 with Hole × 2
-
Plate Round Half 3 × 6 with 1 × 2 Cutout × 2
-
Technic Axle Pin 3L with Friction Ridges Lengthwise and 2L Axle × 2
-
Plate Special 1 × 2 with Pin Hole Underneath × 2
-
Technic Axle 3 with Stop × 2
-
Wedge Plate 2 × 2 Cut Corner × 2
-
Tile Special 2 × 2 Corner with Cut Corner - Facet × 2
-
Brick Round 2 × 2 Special with Spikes No longer produced · last seen 2023 × 2
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Minifigures 3
-
Monkie Kid
× 1
-
Red Son
× 1
-
Bob with Neck Bracket
× 1
Alternative models
Fan models by Rebrickable users that you can build (mostly) from this set’s parts. Instructions are available from the designers.
View the idea at Rebrickable ↗
What can I build with it?Description
Built around a rival character
Monkie Kid vehicles are usually tied to a specific character rather than a generic theme, and this jet is Red Son's: sharp, angular shapes and flame-like details set it apart from the rounder hero vehicles elsewhere in the range. Moveable wings or weapon mounts are common on Monkie Kid vehicles, which keeps this one playable alongside other sets rather than just a static shelf piece, and lets it fit straight into an ongoing hero-versus-villain storyline without much extra setup.
A mid-size build with real variety
At 299 pieces with 135 unique parts, the jet sits comfortably in the middle of the Monkie Kid lineup — enough substance to include a proper cockpit, engine detailing and attachments, without demanding a long building session. That part variety is worth noting for anyone comparing sets by piece count alone, since it affects how repetitive or varied the build actually feels from the first brick to the last, and it keeps the process interesting throughout.
A red, black and grey palette
Red dominates the bodywork, with black plus dark and light bluish grey covering the engines, undercarriage and other technical sections — a colour scheme that reads as villainous next to the brighter tones used on most hero vehicles in the theme. The parts list on this page breaks down exactly how those colours are distributed across the model, piece by piece, which is handy for spotting less common shades before starting the build or planning a repaint.
Three figures, built-in conflict
The three included minifigures set up the kind of confrontation the Monkie Kid stories are built around, and the jet pairs naturally with hero vehicles from other sets in the range for bigger play scenes. Anyone hunting for specific parts, whether to finish a build or repurpose elsewhere, can check the full list on this page for exact colours and quantities, making it easier to plan ahead before the next building session begins.
FAQ
- How many pieces and minifigures come with set 80019?
- It includes 299 pieces, 135 of them unique, along with 3 minifigures.
- Which character does the Inferno Jet belong to?
- It's built as Red Son's vehicle, one of the antagonists in the LEGO Monkie Kid series.
- What colours dominate the model?
- Red covers most of the exterior, with black and two shades of grey used for technical details. The exact distribution is listed in the parts list on this page.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



