
Y-wing Attack Starfighter
Set 10134 brings the rebels' dependable bomber to the Ultimate Collector Series. Released in 2004, it uses 1,490 pieces to show off the Y-wing's exposed, workmanlike design.
- Set number
- 10134
- Year
- 2004
- Pieces
- 1,490
- Minifigures
- 1
- Different parts
- 247
Parts list 247
-
Hose, Ribbed 7mm D. 2L / 1.6cm
No longer produced · last seen 2004
× 112
-
Technic Bush 1/2 Smooth with Axle Hole Reduced
No longer produced · last seen 2006
× 50
-
Tile Special 1 × 1 with Clip and Straight Tips
No longer produced · last seen 2012
× 46
-
Brick Sloped Inverted 45° 2 × 2 [Ovoid Bottom Pin, Bar-sized Stud Holes]
No longer produced · last seen 2022
× 40
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 38
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper)
No longer produced · last seen 2014
× 34
-
Technic Pin 1/2 without Friction Ridges
× 26
-
Technic Axle 12
No longer produced · last seen 2014
× 24
-
Technic Axle Connector with Axle Hole
No longer produced · last seen 2021
× 24
-
Technic Axle Connector Ridged [with x Hole x Orientation]
No longer produced · last seen 2006
× 24
-
Tile Special 1 × 2 Grille with Bottom Groove
× 23
-
Plate Special 1 × 2 [Side Handle Closed Ends]
× 19
-
Tile Special 1 × 2 Grille with Bottom Groove
× 18
-
Plate 2 × 6
× 18
-
Brick Special 1 × 2 with Handle
No longer produced · last seen 2004
× 18
-
Bar 1 × 8 with Brick 1 × 2 Curved Top End (Axle Holder Inside Small End)
No longer produced · last seen 2008
× 16
-
Technic Brick 1 × 2 with Axle Hole Type 2 [X Opening]
No longer produced · last seen 2014
× 16
-
Brick Special 1 × 1 with Headlight
× 16
-
Brick Special 1 × 1 with Headlight
× 16
-
Brick Special 1 × 2 Palisade [aka Log]
× 16
-
Minifig Neckwear Bracket [One Stud]
No longer produced · last seen 2018
× 16
-
Plate 2 × 4
× 15
-
Brick 2 × 4
× 14
-
Plate Special 1 × 1 with Clip Horizontal [Thick U Clip]
No longer produced · last seen 2012
× 14
-
Technic Axle 3 with Stud
No longer produced · last seen 2019
× 14
-
Tile 1 × 2 with Groove
× 13
-
Tile 1 × 4 with Groove
× 12
-
Brick Special 1 × 2 with Grille
× 12
-
Plate 4 × 6
× 12
-
Plate 2 × 10
× 12
-
Tile 1 × 8 with Groove
× 12
-
Brick Special 1 × 4 with 4 Studs on One Side
× 12
-
Plate 2 × 4
× 11
-
Plate 2 × 2
× 11
-
Plate 1 × 10
× 11
-
Tap 1 × 1 with Hole in Spout
No longer produced · last seen 2009
× 11
-
Brick Round 1 × 1 Open Stud
× 10
-
Brick Sloped Inverted 45° 2 × 1
× 10
-
Hinge Brick 1 × 2 Base
× 10
-
Tile 1 × 8 with Groove
× 10
-
Technic Axle 5
× 10
-
Tile 1 × 4 with Groove
× 8
-
Lever Small Base with Light Bluish Gray Lever
× 8
-
Brick 2 × 3
× 8
-
Brick 1 × 4
× 8
-
Brick Sloped 45° 2 × 4
× 8
-
Brick Sloped 45° 2 × 2
× 8
-
Brick Sloped 45° 2 × 1 Triple with Ovoid Bottom Pin
No longer produced · last seen 2013
× 8
-
Plate 1 × 3
× 8
-
Technic Bush
× 8
-
Torso Mechanical, Battle Droid
× 8
-
Arm Mechanical with 2 Clips [Battle Droid]
× 8
-
Technic Axle 2 Notched
× 8
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper)
No longer produced · last seen 2014
× 8
-
Plate Special 1 × 2 with 1 Stud without Groove (Jumper)
No longer produced · last seen 2013
× 8
-
Hinge Brick 2 × 2 Top Plate Thin
× 8
-
Hose Rigid 3mm D. 8L / 6.4cm
No longer produced · last seen 2004
× 8
-
Plate 4 × 8
× 7
-
Brick Round 1 × 1 Open Stud
× 7
-
Plate 1 × 6
× 7
No part matches this colour selection.
Import on BrickLink: Wanted → Upload, upload the file (or paste its content), pick a Wanted List and add the parts.
Spare parts (13)
These extra parts come with the set in case one gets lost.
-
Hose, Ribbed 7mm D. 2L / 1.6cm
No longer produced · last seen 2004
× 3
-
Technic Pin with Friction Ridges Lengthwise and Center Slots
No longer produced · last seen 2021
× 1
-
Weapon Lightsaber Hilt without Bottom Ring
No longer produced · last seen 2007
× 1
-
Lever Small Base with Light Bluish Gray Lever
× 1
-
Arm Mechanical with 2 Clips [Battle Droid]
× 1
-
Tile 1 × 1 with Groove
× 1
-
Technic Bush 1/2 Smooth with Axle Hole Reduced
No longer produced · last seen 2006
× 1
-
Technic Bush
× 1
-
Technic Pin 1/2 without Friction Ridges
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Plate Round 1 × 1 with Solid Stud
× 1
-
Hose Rigid 3mm D. 6L / 4.8cm
No longer produced · last seen 2004
× 1
-
Hose Rigid 3mm D. 8L / 6.4cm
No longer produced · last seen 2004
× 1
Minifigures 1
Description
Exposed machinery
What sets the Y-wing apart from sleeker rebel fighters is its open midsection, where pipes, frames and mechanical detail sit uncovered between the cockpit and the engine nacelles. Recreating that look takes many small, specialised elements, and this is reflected in the inventory: 247 unique parts across 1,490 pieces is a high ratio. The build rarely repeats itself, and you move from one small sub-assembly to the next. If you enjoy detail work, that is the main attraction of this set.
From Yavin to Endor
Y-wings fly alongside X-wings in the attack on the first Death Star in A New Hope, diving into the trench under heavy fire. They return in Return of the Jedi for the Battle of Endor. Compared with the X-wing, the Y-wing looks older and more battered, a ship kept flying through repairs rather than replaced. That rugged character is exactly what the model captures with its mix of light and dark tones.
Colours and the included figure
Light bluish grey and white form the base colours, while dark bluish grey and black give depth to the open sections. The catalogue lists 1 minifigure with the set, which you can see in the minifigure section on this page. Placed beside the model, it gives a sense of scale and adds a human touch to the display. It was also one of the earlier Ultimate Collector Series sets to use the newer bluish greys.
Parts worth keeping
Small greebling parts are the kind of elements many builders never have enough of, and this set contains plenty. Pipes, clips and small brackets can lift a plain hull on almost any spacecraft you design yourself. If you want to see what else the inventory could become, the What can I build? feature on this page compares it with other sets. When checking a used copy, go through the parts list below carefully, as small detail pieces are easy to lose.
FAQ
- Why does the Y-wing have so many unique parts?
- Its exposed midsection needs lots of small, specialised elements to recreate the visible machinery. That pushes the count up to 247 unique parts.
- How many minifigures come with 10134?
- The catalogue lists 1 minifigure for this set.
- Which battles does the Y-wing appear in?
- Most famously the attack on the first Death Star in A New Hope and the Battle of Endor in Return of the Jedi.
Reviews
No reviews yet. Build the set and tell others how you liked it.
Sign in to review this set. Sign in
Only signed-in users can write reviews, one per set. We check every review against our rules before it is published; we do not check whether the set was bought or built.



